Material:
- Body: High strength corrosion resistant aluminium
- Bolts: DIN 933, steel, 8.8, Dacromatized
- Nuts: DIN 934, steel, Dacromatized. pressed into lower clamp body
- Spring: DIN 127, steel, Dacromatized
- Washers: Dacromatized.
Design Features:
- The forged aluminium clamps was use for aluminium to aluminium connection throughout the conductor range.
- The clamps have serrated transverse grooves for maximum conductor contact, use dacromet steel bolts and Belleville washers to prevent thermal ratcheting under cyclic loads.
- The clamps are coated with an oxide inhibitor. And hot-dip galvanized steel bolts and nuts was on requirement, also we can change to stainless bolts and nuts with washers.
Use:
- Widely used for applications where electrical wire is terminated to a machine or electrical equipment.
- Used for terminating cables where vibration is critical.
- For electrical conductivity and mechanical strength to withstand vibration and pull off.
| Type | Bolt Torque | Counductor Range - Aluminum Run | No./ Size of Bolts | |
|---|---|---|---|---|
| mm2 | O.D. | |||
| F/T | 13 Nm | 6-35 | 2.7-7.5 | 2 X M6 |
| F/T | 22 Nm | 16-70 | 5.1-11.7 | 1 X M8 |
| F/T | 22 Nm | 16-70 | 5.1-11.7 | 2 X M8 |
| F/T | 22 Nm | 16-95 | 5.1-12.5 | 2 X M8 |
| F/T | 22 Nm | 16-150 | 5.1-15.7 | 1 X M8 |
| F/T | 22 Nm | 16-150 | 5.1-15.7 | 2 X M8 |
| F/T | 29 Nm | 25-185 | 6.3-17.5 | 2 X M10 |
| F/T | 22 Nm | 16-150 | 5.1-15.7 | 3 X M8 |
| F/T | 29 Nm | 25-200 | 6.3-18.9 | 3 X M10 |
| F/T | 29 Nm | 30-300 | 7.5-22.5 | 3 X M10 |
| F/T | 29 Nm | 95-240 | 12.5-20.3 | 3 X M10 |
We can manufacture and export Aluminum to Aluminium Connector as per specifications (custom drawing and samples) for more information please Contact us