Material:
- Body and Keeper: 356-T6 Aluminum Alloy
- Hardware: Galvanized Steel
- Casting: Aluminium Alloy, High Strength Copper Alloy
- Socket and Clevis: Ductile iron, Galvanized Steel
- Cotter Pin: 302 stainless steel
Design Features:
- Suspension cable clamp set with pre-installed aluminum plastic bracket.
- The conductor diameter range is minimized to eliminate excessive conductor distortion and fatigue.
- The long and gradually curved clamp groove distributes and minimizes the clamping and supporting loads to prevent damage to the conductor strands.
- The clevis pin is locked against rotation to avoid excessive wear on the clamp ears and cotter key.
- All Bolts are captive for ease of clipping in.
Use:
- For standard voltage application with all aluminum, ACSR, or aluminum alloy conductor.
- The clamps are designed to hang self-supporting cable lines with an isolated neutral links.
- Designed to hold down weights may be attached after installation.
- Supported on horizontal or vertical line post insulator.
- A reversible keeper allows a large conductor range for each clamp size.
- For wiring Fiber optic cable with electrical pole.
CONDUCTOR Range (Inches) | Clamp Dimensions (Inches) | U-Bolts Inches | ||||
---|---|---|---|---|---|---|
A | B | C | D | E | ||
0.20-0.62 | 6 1/2 | 2 1/8 | 3/4 | 30 | 11/16 | 1/2 |
0.25-0.75 | 6 1/2 | 2 1/4 | 7/8 | 30 | 11/16 | 1/2 |
0.40-0.86 | 7 1/2 | 2 3/8 | 1 | 30 | 11/16 | 1/2 |
0.40-1.05 | 7 1/2 | 2 1/2 | 1 1/8 | 30 | 11/16 | 1/2 |
0.75-1.19 | 8 | 2 5/8 | 1 3/8 | 30 | 13/16 | 1/2 |
0.80-1.39 | 8 | 2 7/8 | 1 1/2 | 22 1/2 | 13/16 | 1/2 |
0.90-1.49 | 9 | 3 1/8 | 1 5/8 | 22 1/2 | 13/16 | 1/2 |
1.00-1.62 | 9 1/2 | 3 1/4 | 1 7/8 | 22 1/2 | 13/16 | 1/2 |
1.00-1.82 | 10 1/8 | 3 3/8 | 2 | 22 1/2 | 13/16 | 1/2 |
1.40-2.04 | 10 1/4 | 3 1/2 | 2 1/4 | 20 | 13/16 | 1/2 |
1.62-2.27 | 11 | 4 | 2 3/8 | 20 | 13/16 | 5/8 |
We can manufacture and export Aluminium Suspension Clamps as per specifications (custom drawing and samples) for more information please Contact us